Hunter Hydrawise HC-1200M - Page 7

7
HYDRAWISE APP CONFIGURATION
Your Hydrawise controller needs to be congured for the new expansion module. Once
you have added an expansion module to your controller you will be able to congure
extra zones.
Log Into Your Hydrawise Account
1. Log into your account as you did when rst registering your controller.
Add Your Expansion Module To Your Controller’s Conguration
2. In the Conguration section, add a new Expansion Module. Give it a name and an ID
number between either 1 and 2. This ID number must match the ID you congured
on the Expansion Module’s touchscreen. Within 60 seconds the Expansion Module
ID on the Expansion Module should change to a green color and the status will
change to Online to indicate successful conguration.
Add New Zones
3. Go to Zones to add your new irrigation zones.
You have now successfully nished installation.