5
Connecting Solenoid Valves
Your expansion module has 12 zones. If you have a master valve, it must be connected
to the master controller. Refer to your HC Controller Quick start guide or
hunter.direct/hchelp for wiring instructions.
Connecting The Expansion Module To The Master Controller
Power for the Expansion Module is supplied by the master controller via a cable between
the units. Note that only the 12 zone controller supports expansion modules.
Expansion module cabl eTo other Expansion Modules
HC
HC
Hydrawise
™
Expansion Module Cable To Other Expansion Modules
Expansion Module Cable
MASTER CONTROLLER EXPANSION MODULE
To Next Page
Loading...