4 Declaration of conformity_6871
Third Party Testing Performed by - Not Applicable/ Tests durch Dritte durchgeführt von - Unzutreffend / Tests tiers effectués par - N’est pas
applicable / Pruebas de terceros realizadas por - No aplica / Test di terze parti eseguiti da - Non applicabile / Tredjepartstestning utförd av - Inte
tillämpbar / Tredjepartstest udført af - Ikke anvendelig / Tests door derden uitgevoerd door - Niet toepasbaar / Testes de Terceiros Realizados por
- Não aplicável / Harmadik fél által végzett tesztelés: Nem alkalmazható / Testiranje treće strane provodi - Nije primjenjivo / Testování třetí stranou
provádí - Nelze použít / Testy strony trzeciej przeprowadzone przez — Nie dotyczy / Kolmannen osapuolen testauksen suorittaa - Ei sovellettavissa /
Δοκιμές τρίτων που πραγματοποιήθηκαν από - Δεν εφαρμόζεται / Тестване от трета страна, извършено от - Не е приложимо / Kolmanda osapoole
testimise viis läbi – Ei kohaldata / Trečiosios šalies bandymus atliko – Netaikoma / Trešās puses testēšanu veic - Nav piemērojams / Testovanie treťou
stranou vykonávané spoločnosťou - Nepoužiteľné / Testiranje tretje osebe izvaja - Se ne uporablja / Testare terță parte efectuată de - Nu se aplică
Applicable Harmonized Standards / Anwendbare harmonisierte Normen / Normes harmonisées applicables / Normas armonizadas aplicables /
Standard armonizzati applicabili / Tillämpliga harmoniserade standarder / Gældende harmoniserede standarder / Toepasselijke geharmoniseerde
normen / Normas Harmonizadas Aplicáveis / Alkalmazandó harmonizált szabványok / Primjenjivi harmonizirani standardi / Použitelné harmonizované
normy / Obowiązujące normy zharmonizowane / Sovellettavat harmonisoidut standardit / Ισχύοντα Εναρμονισμένα Πρότυπα / Приложими
хармонизирани стандарти / Kohaldatavad harmoneeritud standardid / Taikomi darnieji standartai / Piemērojamie saskaņotie standarti / Použiteľné
harmonizované normy / Veljavni harmonizirani standardi / Standarde armonizate aplicabile : EN ISO 12100:2010, EN 60204-1:2006, EN ISO 13850:2015,
EN ISO 14120:2015, EN ISO 13854:2019, EN ISO 4414:2010, EN 55011:2009, Group 1, Class A, EN 61000-6-2:2005, EN 61000-6-4:2007, EN 50581:2012
Responsible for / Verantwortlich für / Responsable de / Responsable de / Responsabile di / Ansvarig för / Ansvarlig for / Verantwoordelijk voor /
Responsável por / Felelős valamiért / Odgovoran za / Zodpovědný za / Odpowiedzialny za / Vastuussa / Υπεύθυνος για / Отговорен за / Vastutav /
Atsakingas už / Atbildīgs par / Zodpovedný za / Odgovoren za / Răspunzător de : Marco Kempin, Hunter Deutschland GmbH, Benzstraße 36, 82178
Puchheim Germany
Title of signatory:
Robert Bruce
Engineering Administrator
Signed for and on behalf of the manufacturer.
UK Declaration of Conformity UK Declaration of Conformity
(Manufacturer’s Declaration)(Manufacturer’s Declaration)
We herewith declare, HUNTER ENGINEERING COMPANY
11250 Hunter Drive
Bridgeton, Missouri 63044-2391 USA
that the following described equipment in our delivered version complies with the appropriate basic safety and health requirements based on its design and type,
as brought into circulation by us. In case of alteration of the equipment, not agreed upon by us, this declaration will lose its validity. This declaration is issued
under the sole responsibility of the manufacturer.
Description of the equipment part : Automotive Tire Changing Machines
Equipment type : TCR1 series, TCR1S series, TCR1X series, TCR1H series, TCM series
Serial Number : KBXXXX (First two digits represent month/year)
Applicable UK Regulations
; The Electromagnetic Compatibility Regulations 2016 / S.I.2016:1091
; The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 / S.I.2012:3032
; Supply of Machinery (Safety) Regulations 2008 / S.I.2008:1597
Designated Standards: EN ISO 12100:2010, EN 60204-1:2006, EN ISO 13850:2015, EN ISO 14120:2015, EN ISO 13854:2019, EN ISO 4414:2010, EN
55011:2009, Group 1, Class A, EN 61000-6-2:2005, EN 61000-6-4:2007, EN 50581:2012
Certificate No.: Not applicable
UK Authorized Representative: Authorized Representative Service, The Old Methodist Chapel, Great Hucklow, SK17 8RG, UK
Person Authorized to compile the technical file: Hunter Engineering Company
11250 Hunter Drive
Bridgeton, Missouri 63044-2391-USA
________________ February 21, 2023
Title of signatory: Robert Bruce
Engineering Administrator
Signed for and on behalf of the manufacturer.
Archives
____________
Equipment.-No.
February 21, 2023
Ref. 6871-TE
To Next Page
Loading...
