Hunter Melbourne - Installing the Canopy; Securing the Canopy; Installing the Blades; Attaching Blades to Blade Irons

7
1886
1886
Installing the Canopy
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the hardware bag.
F
i
t
t
h
e
c
a
n
o
p
y
i
n
p
l
a
c
e
a
s
s
h
o
w
n
.
bag
Canopy Screw
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Remote Troubleshooting
NOTICE
If screw holes do not align
properly then rotate the canopy
180 degrees. Hanger ball shape
must match canopy opening for
correct canopy installation.
Assembling the Cap
Fan style may vary.
Note:
Installing the Blades:
Attach each blade to a blade iron using the blade
washer, found in the hardware bag, and the blade
assembly screws, found in the hardware bag.
Repeat x3
x6
bag
Blade Screw
x3
Blade Washer
bag