Hunter Norden - Fan Wiring Procedures; Single Switch Wiring Configuration; Dual Switch Wiring Configuration

6
1886
1886
Need a little more help* with wiring?
Visit our wiring video at: http://bit.ly/WireYourFan
*Fan style and features shown may vary.
We know wiring is hard. Let’s make it easier.
You are going to need these:
4 Wire Nuts (these are in the bag)
Follow these steps to get your fan wired quickly and safely. Follow the route below that best matches your wall switch
setup. If you are unfamiliar with wiring or uncomfortable doing it yourself, please contact a qualied electrician.
Have a single switch?
Follow these steps:
Have dual switches?
Follow these steps:
Have extra wiring?
Turn the wires upward and push them carefully back through
the hanger bracket into the outlet box. Make sure that the
wires are still attached to the wire nuts.
Hunter Pro Tip:
Hunter Pro Tip:
Here is how to connect the wires:
Push the bare metal ends of the wires together and slide a wire
nut over them. Then, twist the wire nut clockwise until tight.
Give it a gentle pull to make sure none of the wires are loose.
Wiring the Fan
Connect the white
(grounded) wire
from the ceiling
to the white wire
from the fan.
Connect the white
(grounded) wire
from the ceiling
to the white wire
from the fan.
Cap the blue wire from the
fan. You will not need it
for single switch wiring.
Connect the second ungrounded
(light) wire from the ceiling to
the blue wire from the fan.
Connect the black
(ungrounded) wire from
the ceiling to the black
wire from the fan.
Connect the three
grounding wires (green,
green/yellow stripe, or
bare copper) coming from
the ceiling, downrod, and
hanging bracket.
Connect the three
grounding wires (green,
green/yellow stripe, or
bare copper) coming from
the ceiling, downrod, and
hanging bracket.
Connect the black
(ungrounded) wire from
the ceiling to the black
wire from the fan.
Blue
Blue
Black
Black
Green/Yellow Stripe
Green/Yellow Stripe
White
White
Ungrounded
Ungrounded
Ungrounded (light)
Grounded
Grounded
Grounding
Grounding
G
r
e
e
n
/
Y
e
l
l
o
w
S
t
r
i
p
e
G
r
e
e
n
/
Y
e
l
l
o
w
S
t
r
i
p
e
x4
bag
x4
bag
Wire Nut
Wire Nut
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Glass/Bulbs Remote
WARNING
All wiring must be in accordance with
national and local electrical codes ANSI/NFPA
70. If you are unfamiliar with wiring or in
doubt, consult a qualied electrician.