Hunter Pelston - Canopy and Blade Installation

7
8
1886
1886
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Glass/Bulbs
Canopy Screw
Installing the Bulbs and Glass
Installing the Canopy
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the hardware bag.
F
i
t
t
h
e
c
a
n
o
p
y
i
n
p
l
a
c
e
a
s
s
h
o
w
n
.
bag
x8
Repeat x4
Canopy Screw
Blade Arm Screw
Fan style may vary.
Note:
Let the tool do the work!
A magnetic screwdriver will
give you more visibility when
securing the canopy.
Hunter Pro Tip:
Installing the Blades:
x12
x12
Insert grommets found in the hardware bag into the
holes in the blades, then secure each blade to a blade arm
with screws found in the hardware bag.
Repeat x4
bag
bag
Blade Screw
Grommet
IMPORTANT
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.
Fan style may vary.
Note:
Assembling the Light
bag
Lightly attach the blade arms to the motor with
screws found in the hardware bag, then
securely tighten after both screws are attached.