Hunter PermaLife 30747 - Page 12

41555-011 12
Air Purier Maintenance
FILTER
2. Next, remove the front grill. Place your ngers under the handle on the grill
and pull forward, then up. Refer to Figs. 4 and 5 (pg. 6).
3. Gently pull on the cleanable lter to remove it from the unit. While removing
the cleanable lter, note the directional arrows printed on the top of the
lter. The cleanable lter will be reinstalled with the same orientation. Refer
to Fig. 10.
4. The label on the top side of the cleanable lter points to the side that should
be cleaned. Refer to Fig. 10. With a vacuum cleaner and upholstery brush
attachment, clean the cleanable lter until all particles are removed. Do not
use water or liquids to clean the cleanable lter.
5. Install the cleanable lter with arrows pointing towards the unit. Refer to Fig.
10. Press the lter’s frame rmly into the air purier. To avoid damaging the
cleanable lter media, you should press on the cleanable lter’s frame only.
6. Place the front grill back onto the unit. First, line up the tab on the bottom
of the grill with the recess on the purier base and then push the top of the
grill forward until it is closed. Refer to Figs. 6 and 7 (pg. 7). NOTE: This unit
will not operate unless the grill is in the correct position.
7. Plug in the unit.
8. To reset the cleanable lter counter, press the CLEANABLE FILTER RESET key
for 2 seconds. The cleanable Filter Counter will return to 100% and the Clean-
able Filter indicator will stop ashing.
Fig. 10