Hunter Ridgefield - Downrod Replacement; Downrod Removal Steps; Downrod Reassembly Steps; Downrod Assembly Safety

11
PB
1886
1886
Downrod
If you need a different downrod length follow these steps:
Assembled downrod
should look like this
Here is another view of
the downrod assembly
unassembled.
Follow steps 1-5 to remove standard downrod pipe
Follow steps 6-10 to reassemble with new downrod
1 2 3 4 5
678910
1
10
9
2
7
4
8 3
65
Pin
Pin
WARNING
FAN FALL HAZARD
To prevent SERIOUS INJURY or DEATH:
• ALWAYS follow the downrod assembly
instructions exactly.
• VERIFY the downrod is assembled correctly
by rmly pulling on the hanger ball.
• Pin must be reinserted to secure
downrod assembly.