Need help?Do you have a question about the Hunter Roswell and is the answer not in the manual?
Essential safety precautions including electrical shock, fire risk, and personal injury.
List of necessary tools for completing the ceiling fan installation.
Overview of all parts included in the fan box with visual references.
Ensuring adequate clearance from walls and floor for safe fan operation.
Confirming the outlet box is securely mounted and suitable for fan support.
Determining ceiling type (flat or angled) to select appropriate mounting.
Information on downrod length and kits needed for sloped ceilings.
Choosing between machine screws or wood screws for securing the bracket.
Sequential instructions for assembling and attaching the downrod to the fan motor.
Critical warning to properly tighten the setscrew to prevent fan detachment.
Steps for placing the downrod ball into the ceiling bracket and securing the fan.
Instructions for connecting fan wires to the building's electrical supply.
Ensuring proper grounding and tidying excess wires for safety and neatness.
Aligning and securing the canopy to cover the ceiling bracket and wiring.
Attaching the fan blades to the motor assembly using screws and washers.
Fastening the assembled blades to the motor housing with screws.
Attaching the decorative cage to the fan's upper structure.
Ensuring power is off at the source before working on the wall control.
Installing the battery and adjusting dip switches for the wall control.
Connecting the wall control to the house wiring using provided nuts.
Securing the wall control and its plate to the wall.
Instructions on how to change the fan's rotation direction for downdraft or updraft.
Solutions for fan not working, wobbling, noisy operation, or remote control problems.
Information on what the motor and other fan parts are covered for.
Exclusions from warranty, including labor, cosmetic issues, and improper installation.
Steps to follow and contact information for requesting warranty service.
Instructions on how to remove and reassemble the downrod for different lengths.
To Next Page
General
