Hunter Roswell - Attaching Canopy and Blades; Canopy Installation; Blade Assembly Mounting

6
1886
1886
Installing the Canopy
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the hardware bag.
F
i
t
t
h
e
c
a
n
o
p
y
i
n
p
l
a
c
e
a
s
s
h
o
w
n
.
bag
Canopy Screw
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Control Troubleshooting
NOTICE
If screw holes do not align
properly then rotate the canopy
180 degrees. Hanger ball shape
must match canopy opening for
correct canopy installation.
Fan style may vary.
Note:
Installing the Blades:
Slide blade into blade assembly slot and align screw holes of the blade with the
screw holes in the blade assembly. Attach each blade to blade assembly using the
blade screws and washers, found in the hardware bag.
Repeat x3
x9
bag
Blade Screw
x9
Blade Washer