Need help?Do you have a question about the Hunter Rogers and is the answer not in the manual?
General| Blade Sweep (in.) | 52 |
|---|---|
| Number of Blades | 5 |
| Motor Type | AC |
| Mounting Options | Downrod |
| Indoor/Outdoor | Indoor |
| Category | Ceiling Fans |
Check room dimensions for clearance and ensure secure outlet box mounting.
Evaluate ceiling angle for standard or angled mounting and necessary kits.
Details on using longer downrods and angled mounting kits for sloped ceilings.
Secure bracket to outlet box using machine screws and washers.
Connect white to white, black to black/blue wires, and ground wires.
Connect white to white, black to black, and blue to blue wires, plus grounds.
Twist wire ends together, secure with wire nut, and tug to test connection.
Arrange wires by type (grounded/ungrounded) in the outlet box.
Check power, pull chains, reverse switch, circuit breaker, and wiring connections.
Ensure blades are installed correctly, hanger ball is seated, and use balancing kit.
Verify blade installation and check for cracked blades; replace if necessary.
Always follow instructions and verify assembly by pulling on the hanger ball.
To Next Page