Auto – camera will automatically enter MMS & 4G setups when the SIM card is
inserted.
Manual – if "SIM Auto match failed, enter setup manually" pops up on screen,
switch “SIM Auto Match” to “Manual” mode, then enter MMS & 4G setups in
“Manual Setup”.
Enter setups below manually in “Manual” mode if your local operator can’t be
automatically matched by camera itself.
MMS – contact your operator for MMSC/APN/Proxy/Port (Username & Password if
required) and enter this info manually.
Note!
● With MMS setups added, camera can send photos to preset phones/ email. If
MMS is with wrong information entered, then phones/ email accounts will not be
able to receive photos from camera.
● Email accounts receive photos from camera via SMTP only when SMTP is ON
and with correct SMTP info entered.
● Camera is not able to send pics to emails via MMS when SMTP is ON.
4G – Enter your local operator’s 4G APN, and corresponding Username and
Password.
Note!
● Only with 4G setups added, can SMTP and FTP functions work.
● It’s not a must to enter Username and Password of APN. But some operators
may require this password access to enable 4G function. For details, contact your
local operator.
You can simply choose to allow pics to be sent to your phone number via MMS by
switch ON/ OFF MMS function here.
MMS can only send small size pics to your phone number.
Default – camera comes with default SMTP setups; you only need to enter
receiving email accounts in “Send to”.
Manual – finish setups below if you’d like to use your own SMTP server.
To Next Page
Loading...
