Hunter Supreme - PIR Menu Settings; PIR Switch and Sensitivity; Delay, Time Lapse, and Timers

PIR
Settings
Programmable Options
PIR Switch
ON – camera can take photos/ videos per motion even when Time
Lapse is ON.
OFF – camera will not be able to take photo/ video per motion.
Sensitivity
High/ Middle/ Low
Higher sensitivity is a) more sensitive to movements by smaller
subjects; b) longer detection distance; c) easier for sensor to detect
difference between body heat and outdoor temperature; d) easier
to trigger camera to record.
In high temperature environment, body heat of subjects and
environment temperature is hard to tell by camera, suggest setting
High.
Delay
Select “ON”, press “OK”, to set a time interval between photos or
videos upon motion. This option can avoid camera taking too many
photos or videos.
Example: Camera will wait 1 minute between photo/video
recordings with motion if pre-set time interval is 00:01:00.
Configurable delay time: 00:00:03~23:59:59.
Time Lapse
Select “ON”, press “OK”, to set the interval; camera will shoot pics
or video clips automatically upon the interval user set. Object
motion can still trigger the camera to take photos/ videos if PIR
Switch is ON.
Configurable interval: 00:00:03~23:59:59.
Timer1
Select “ON”, press “OK”, to set the beginning time and end time
(hour/minute); camera will only work during the time period user
set.
i.e.: 06:00 – 10:00; camera only works during 06:00 – 10:00
Timer2
Select “ON”, press “OK”, to set the beginning time and end time
(hour/minute); camera will only work during the time period user
set.
i.e.: 15:00 – 18:00; camera only works during 15:00 – 18:00