Unlimited – default
1~99 – Optional
i.e.: user chooses 50, then camera will only send (Photos/Videos) 50 times every
day. Each time, camera will send to all entered emails/ phones/ FTP accounts. All
the rest photos/ videos upon triggers will only be stored in SD card.
Daily – Camera will only be able to change & save setups remotely when camera
send daily report. Suggested for AA battery power.
Instant – Camera 4G module is in stand-by all the time, camera setups can be
changed and saved whenever you send the remote SMS setup command.
Suggested when using Power adapter as this option will consume huge battery
power.
OFF – no Daily Report.
ON – select ON for setting the time when you want camera to send you the Daily
Report.
Daily Report contains: Device IMEI Number, CSQ (Signal Strength) 0~31, Camera
ID, Temperature, Date & Time, Battery Left Volume, SD Card Info, Total Pics
Taken by Cam and Send Times.
You can ignore below description if your SIM card already has been activated, “Pls
input PIN-Code” will not pop up.
1. Camera will check if inserted SIM card is activated during signal search in
“Test” mode.
2. If SIM is not activated, “Pls input PIN-Code” will pop up on screen after signal
search.
3. Then “SIM PIN” will turn to be configurable in “4G” page of Menu.
4. Enter PIN code in “SIM PIN”; camera will auto power off. Camera will activate
SIM card automatically during signal search when you restart the camera after
you enter the PIN code.
Note!
● “Pls input PIN-Code” will pop up again if wrong PIN code is entered.
● Re-try your PIN code if you see “Pls input PIN-Code” after signal search.
● SIM is normally limited to 3 attempts then it will be locked. We suggest you
confirm your PIN code before 3
rd
attempt.
● Insert the SIM card into your phone to unlock it using PUK code if it has been
locked.
With GPS turned ON, GPS info will be shown on picture stamp.
Note! If GPS signal is weak, GPS info will not be shown on stamp until the GPS
signal gets stronger.
To Next Page
Loading...
