Hunter Supreme - Other Menu Settings; Language and Date;Time Settings; Stamp, Battery, and Frequency; Security and Firmware Updates

Other
Settings
Programmable Options
Language
English, Swedish, Norwegian, Finnish, German, Danish
Date/Time
Auto – camera will synchronize data/time after you enter your time
zone info.
Manual – manually set date/time.
Note! Adjust camera date/time to ensure some functions work as
expected.
Stamp
Imprints of programmed camera ID, moon phase, temperature,
date, and time on photo
Battery Type
Alkaline/ NI-MH
Choose correct battery type of using batteries in camera makes
camera perform better.
Frequency
50Hz/ 60Hz – improper setting may cause camera screen flicker
SD Cycle
Select “ON”, press “OK”, camera will continue to record
photos/videos by deleting earliest photos or video clips.
Password
Select “ON”, press “OK”, to enable password protection for your
camera; support totally 6 digits/ alphabets long password access.
Reset
Select “Yes” to reset camera back to factory default settings.
FW Update
With update firmware in the SD card, you can enter this menu to
update camera firmware by confirming “Yes” in the options.
About
Firmware version in camera (Version: / IMEI: / MCU:/MOD:)