14
45019-01 • 06/03/11 • Hunter Fan Company
6 • Wiring the Fan
6-6. Check each connection to make sure no bare wire or wire strands
are visible. Turn the splices upward and push them carefully back
through the ceiling plate into the outlet box.
6-7. Spread the wires apart, with the ground wires on one side of the
outlet box and the ungrounded wires on the other side of the
outlet box.
6-8. Position the receiver in the canopy so that the antenna is close to
the edge of the ceiling plate for clear reception.
To Next Page
Loading...
