8
EN
WPS SETUP
1. Press the WAND button three times:
• The solid amber ● LED on the module will
blink three times per second.
2. Press the WPS button on your Wi-Fi router.
3. Once connected, the module
LED will turn solid green ●. The word “DONE”
and a solid icon will appear on the controller LCD.
4. Open the Hydrawise smartphone app,
navigate to Setup Wizard, select your X2 model.
Continue following the instructions on the app
programming screen.
NOTE: Pairing will stop aer 2 minutes if no action is taken.
Press the WAND button three times to restart WPS setup.
To Next Page
Loading...
