Need help?Do you have a question about the Hunter Hydrawise WAND FOR X2 and is the answer not in the manual?
General| Compatibility | Hunter X2 controllers |
|---|---|
| Connectivity | Wi-Fi |
| Remote Control | Yes, via Hydrawise app |
| Battery Life | N/A (powered by controller) |
| Type | Wi-Fi Module |
| Programming | Via Hydrawise app or web browser |
| Predictive Watering | Yes |
| Range | Dependent on Wi-Fi range |
| Waterproof Rating | N/A (Indoor Use with Controller) |
| Function | Enables Wi-Fi connectivity and remote control for Hunter X2 controllers |
Steps to reboot the controller to resolve Wi-Fi communication issues.
Steps to perform a factory reset and erase configuration settings.
Explains how to use the controller and its functions when internet is unavailable.
Guide to using a smartphone hotspot for controller setup without Wi-Fi.
Methods for configuring the controller for offline operation directly.
Adjusting monthly watering percentages through the Hydrawise app.
Steps to adjust seasonal watering percentages directly on the controller.
Explanation of various server status messages like 'Wireless Down' or 'Connecting'.
How the controller operates and adjusts watering without internet.
Step-by-step guide to manually run a single irrigation zone from the controller.
How to stack and run multiple zones sequentially from the controller.
Diagnosing a blank display by checking transformer voltage.
Steps to add and configure a flow meter sensor in the Hydrawise app.
Steps to log in and create a flow sensor in the Hydrawise app.
Steps to follow if the flow meter is not recording data in the app.
Entering calibration details for pulse-based flow meters in the app.
Instructions for wiring the pump start relay to the controller.
Reasons and fixes for sprinklers continuing to run when the controller is off or unplugged.
To Next Page