Need help?Do you have a question about the Hunter Hydrawise HCC-FPUP and is the answer not in the manual?
General| Model | HCC-FPUP |
|---|---|
| Wi-Fi Connectivity | Yes |
| Weather Sensor Compatibility | Yes |
| Mounting | Wall Mount |
| Flow Meter Compatibility | Yes |
| Master Valve/Pump Start | Yes |
| Warranty | 2 years |
| Watering Restrictions | Customizable |
| Controller Type | Modular |
| Zones | 8 |
| Compatible App | Hydrawise |
| Power Source | 24V AC |
| Compatibility | Compatible with most irrigation systems |
| Weather Adjustment | Predictive watering based on local weather data |
| Sensor Inputs | 2 (configurable) |
Configure the controller using a smartphone hotspot when Wi-Fi is unavailable.
Details Standard and Advanced modes for manual configuration without internet access.
Procedure to modify monthly watering percentages using the Hydrawise app.
Steps for manually setting monthly watering percentages directly on the controller.
Accessing and understanding the controller's connection and operational status.
Interpreting various messages indicating the controller's connection to Hydrawise servers.
Metrics for connection success and advice on enhancing wireless signal strength.
Details on offline operation, saving settings, and serial number information.
Checking IP address, DNS, and using the network test feature.
Guidance on resolving common problems when connecting the controller to Wi-Fi.
Step-by-step guide to manually start and stop a single irrigation zone from the controller.
Instructions for sequentially running multiple zones manually from the controller.
Steps to add and configure a flow meter sensor within the Hydrawise application.
Overview of flow meter parts and essential installation guidelines.
Key installation advice, wiring standards, and cable selection for flow meters.
Technical details and specifications for different Hydrawise flow meter models.
How to interpret meter readings and troubleshoot data recording issues.
Steps for adding and calibrating non-standard or third-party flow meters.
Overview of pump start relay function and its operation.
Details pump start relay operation across different controller models.
Guidelines for wiring the pump start relay and connecting to a power source.
Steps for setting up the pump start relay and master valve through the Hydrawise software.
How to configure individual zones for pump start relay activation or deactivation.
Explanation of master valve function and its operation.
Details master valve operation across different controller models.
Instructions for wiring the master valve to the controller.
How to enable or disable the master valve for individual zones in advanced settings.
To Next Page
