Need help?Do you have a question about the Hunter XC HYBRID Series and is the answer not in the manual?
General| Voltage | 24VAC |
|---|---|
| Cycle + Soak | Yes |
| Backlit LCD | Yes |
| Start Times | 4 start times per program |
| Mounting | Indoor/Outdoor |
| Warranty | 2 years |
| Sensor Input | Yes |
| Flow Meter Input | No |
| Battery Backup | Yes |
| Weather Adjustment | Optional |
| Wireless Expansion | No |
Guides for performing quick checks and resets on XC Hybrid controllers.
Feature to insert a delay between station operations for improved performance.
Guides for performing quick checks and resets on X Core controllers.
Feature to insert a delay between station operations for improved performance.
Guides for performing quick checks and resets on Pro C/PCC controllers.
Circuit diagnostic procedure to identify shorts caused by faulty solenoids.
Guides for performing quick checks and resets on ICC controllers.
Circuit diagnostic procedure to identify shorts caused by faulty solenoids.
Procedure for performing a quick check on I Core controllers.
Troubleshooting guide specifically for I Core Dual systems.
Temporarily disables the weather sensor for testing or maintenance.
Allows saving and retrieving preferred watering programs to memory.
Configures a master valve for specific NODE models.
Resets the controller to factory defaults, erasing current program data.
Guides the calibration and setup of the Solar Sync system based on site conditions.
To Next Page
