EasyManua.ls Logo

Hunter X-Core XC-401i-E

Hunter X-Core XC-401i-E
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Residential Irrigation Controller
Owner’s Manual and Programming Instructions
Compatible with Hunter Remotes and Solar Sync
®
SEASONAL ADJUSTMENT
WATER DAYS
START TIMES
SYSTEM OFF
CURRENT TIME/DAY
RUN TIMES
ACTIVE
SENSOR BYPASS
RUN
X-CORE

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Hunter X-Core XC-401i-E and is the answer not in the manual?

Hunter X-Core XC-401i-E Specifications

General IconGeneral
BrandHunter
ModelX-Core XC-401i-E
CategoryController
LanguageEnglish

Summary

Controller Dial Settings

Setting Current TimeDay

Instructions for setting the controller's clock and calendar.

Setting Start and Run Times

How to program watering start times and station durations.

Connecting Valves and Transformers

High Voltage Wiring (Outdoor Model)

Specifics for connecting high voltage power to outdoor models.

Connecting a Master Valve

Connecting a Pump Start Relay

Connecting Weather Sensors

Hunter CLIK Weather Sensor

Connecting and testing a "CLIK" type weather sensor.

Connecting Solar Sync ET Sensor

Wireless Solar Sync Installation

Steps for installing the wireless receiver for Solar Sync.

Solar Sync Settings Configuration

Initial configuration of Solar Sync parameters.

Solar Sync Region Settings

Region Selection Guide

How to select the correct region for Solar Sync based on ET and temperature.

Programming the Controller Basics

Setting the Date and Time

Guide to setting the controller's clock and calendar.

Controller Programming Details

Setting Program Start and Run Times

Programming specific watering start times and station durations.

Selecting Watering Days

Choosing specific days, intervals, or odd/even watering.

Advanced Watering Schedules

Advanced Controller Features

Quick Check Diagnostics

Diagnosing wiring issues with the controller.

Program Memory and Delays

Clearing Controller MemoryResetting

Resetting the controller to factory defaults.

Cycle and Soak Feature

Troubleshooting Guide

Related product manuals