Need help?Do you have a question about the Hunter X-Core XC-601i-E and is the answer not in the manual?
General| Number of Stations | 6 |
|---|---|
| Cycle and Soak | Yes |
| Enclosure Rating | Indoor |
| Display | LCD |
| Mounting | Wall Mount |
| Watering Programs | 3 |
| Program Start Times | 4 per program |
| Watering Days | 7-day calendar |
| Station Run Time | 1 minute to 4 hours |
| Sensor Input | Yes |
| Electrical Input | 230 VAC |
| Battery Backup | 9V |
| Weight | 0.9 kg |
| Valve Type | 24V AC solenoid valves |
| Dimensions | 16.5 cm H x 14.6 cm W x 5.0 cm D (6 1/2" H x 5 3/4" W x 2" D) |
Explains the battery, junction box, terminal strip, and remote connection points.
Instructions for routing valve wires and connecting them to the controller's terminals.
Details AC power connection for outdoor models, including safety precautions.
Diagram and steps for connecting a master valve to the controller.
Instructions for connecting a pump start relay, including placement recommendations.
How to connect a CLIK sensor and how the display indicates its status.
Steps for connecting Solar Sync or Wireless Solar Sync sensors to the controller.
How to set Region and Water Adjustment for the Solar Sync system.
Table and methods for determining the correct region setting for Solar Sync.
Steps to calibrate Solar Sync settings for optimal performance and adjust run times.
Instructions for installing the SmartPort connector for remote control.
Guide to setting the current year, month, day, and time on the controller.
How to set up to four start times per program for daily watering.
Instructions for assigning watering duration for each station, from 1 minute to 4 hours.
How to globally adjust station run times by a percentage for seasonal changes.
To Next Page
