Need help?Do you have a question about the Hunter XC and is the answer not in the manual?
General| Application | Residential |
|---|---|
| Station Output | 24 VAC |
| Warranty | 2 years |
| Voltage | 24 VAC |
| Watering Programs | 3 |
| Display | LCD |
| Programs | 3 |
| Start Times Per Program | 4 |
| Indoor/Outdoor | Indoor |
| Backup Battery | 9V (not included) |
| Mounting | Wall mount |
| Transformer Input | 120V AC |
| Transformer Output | 24V AC |
| Seasonal Adjustment | Yes |
| Enclosure Rating | Indoor/Outdoor (with proper enclosure) |
| Power Source | Transformer (included) |
| Rain Delay | Yes, up to 7 days |
Instructions for physically attaching the controller to a wall.
Guidance on wiring the controller to valves and the power transformer.
Steps to activate the controller's backup battery.
Identifies and illustrates the various parts and connections of the XC controller.
Procedure for replacing the controller's internal lithium battery.
Wiring instructions for master valves, pump relays, and weather sensors.
Information on how the controller handles power outages and retains programmed data.
A template to plan watering schedules for different programs and stations.
Procedure to set the current day and time on the controller's display.
Instructions on how to set up to four start times for each watering program.
How to eliminate or adjust program start times.
Guide to setting individual run durations for each watering station.
Methods for choosing specific days, odd/even days, or interval days for watering.
How to designate specific days when watering should be inhibited.
Enabling the controller to run programmed watering schedules automatically.
How to temporarily halt all watering programs and operations.
Setting a period (1-7 days) to suspend all watering without losing programs.
Making global adjustments to run times based on seasonal needs without reprogramming.
Operating single stations or all stations manually for testing or immediate watering.
Configuring the sensor to disable watering only for specific stations.
Running a test cycle to check all stations sequentially.
Diagnosing wiring problems by initiating a circuit test procedure.
Saving and retrieving watering programs, and clearing controller memory.
Inserting a delay between the shutdown of one station and the start of the next.
Guide to identifying and resolving common problems with the controller's operation.
Details on the controller's functional capabilities and operating parameters.
Technical electrical requirements and ratings for the controller and its components.
Information regarding European directives compliance and FCC part 15 regulations.
To Next Page
