Hunter SRC Plus

Published on Hunter Industries (http://www.hunterindustries.com)
Home > How do I reset my Hunter controller?
Product Lines:
Controllers [1],
Discontinued Models [2]
Products:
X-Core, [3]
XC, [4]
Pro-C, [5]
PCC, [6]
SVC, [7]
ACC, [8]
EC, [9]
Node, [10]
SRC / SRC Plus, [11]
ACC-99D Decoder [12]
Topics:
FAQs, Video
Note: All Hunter controller's must be in the Run position to reset.
SRC
1. Unplug the controller's transformer.
2. Press and hold down the , and buttons.
3. Plug the controller's transformer back in.
4. Release the , and buttons. The display should now show
12:00am. All the memory has been cleared and the controller may now be
reprogrammed.
SRC Plus
1. Press and hold down the , and buttons.
2. Press and release the RESET button in the lower wiring compartment.
3. Release the , and buttons. The display should now show
12:00am. All the memory has been cleared and the controller may now be
reprogrammed.
EC
1. Press and hold down the , and buttons.
2. Press and release the RESET button in the lower wiring compartment.
3. Release the , and buttons. The display should now show
12:00am. All the memory has been cleared and the controller may now be
reprogrammed.

Hunter SRC Plus Specifications

General

Display	LCD
Rain Sensor Input	Yes
Weather Sensor Compatibility	Yes
Application	Residential
Controller Type	Modular
Mounting	Indoor/Outdoor
Transformer Output	24V AC
Seasonal Adjustment	Yes
Compatibility	Hunter Remote
Weather Adjustment	Yes
Watering Restrictions	Yes
Remote Control	Yes, with Hunter Remote
Flow Meter Input	No
Power Source	AC Power

Summary

Controller Reset Procedures

SRC Reset

Unplug transformer, press and hold buttons, plug back in, and release buttons. Display shows 12:00am.

SRC Plus Reset

Press and hold buttons, press RESET, release buttons. Display shows 12:00am.

EC Reset

Press and hold buttons, press RESET, release buttons. Display shows 12:00am.

X-Core and Pro-C Reset

X-Core Reset

Press and hold buttons, press RESET, release buttons. Display shows 12:00am.

Pro-C (Newer Models) Reset

Press dial, press RESET, wait for 12:00am. Release dial.

Pro-C (Older Models) Reset

Turn dial to RUN, remove battery, hold buttons, press RESET, release buttons.

ICC, SVC, and NODE Reset

ICC Reset

Turn dial to RUN, remove battery, hold buttons, press RESET, release buttons.

SVC Reset

Remove battery, press and hold buttons, replace battery, release buttons. Display shows 12:00am.

NODE Reset

Press and hold keys, wait for blank screen and segments, release keys. 12:00 will flash.

ACC Controller Reset Options

General ACC Reset

Press and hold Programs button, then press recessed Reset button. Release Reset, continue holding Programs until screen appears.

Specific Reset Types

Options include Programs, Flow Totals, Logs, Names, and All Data. Use arrows to select and '+' to confirm.