Why does my Hunter Node automatic irrigation not start at the set start time?
This issue may occur if the controller is in System Off mode, or if the AM/PM setting for either the current time or the start time is incorrect. Ensure the controller is programmed for automatic watering and correct the AM/PM settings for both the time of day and the start time.
How to fix a Hunter Node with no display?
If there is no display on your Hunter Controller, it could be because the display is off or the battery is dead. Try pressing any button for 1 second. If that doesn't work, replace the battery.
Why is my Hunter Controller display indicating watering but no water is coming out?
This could be due to several reasons: either there's no water pressure, the solenoid is faulty, or the solenoid is incompatible. To resolve this, first, turn on the main system supply. If that doesn't work, replace the solenoid. Make sure to use a Hunter DC Latching Solenoid (P/N 458200) or another compatible DC latching solenoid.
Why does my Hunter Node Controller water more than one time?
The program might have more than one start time assigned to it; each program can have up to 4 start times. Eliminate program start times as needed.
General| Run Time | 1 minute to 6 hours |
|---|---|
| Water Resistance | IP68 |
| Cycle and Soak | Yes |
| Weather Resistance | Yes |
| Zones | 1, 2 |
| Power Source | 9V battery |
| Watering Schedule | 7-day |
| Enclosure | Plastic |
| Mounting | Wall-mounted |
| Seasonal Adjustment | Yes |
| Compatibility | Hunter |
| Battery Life | Approximately 1 year |
| Battery Type | 9V alkaline battery |
| Operating Temperature | 0°C to 60°C |
Details the functions and indicators of the Liquid Crystal Display.
Explains the function of each physical button on the controller.
Guides the user through setting the current date and time on the controller.
Configures the times when watering cycles begin for each program.
Defines the duration of watering for each station and program.
Selects specific days of the week for watering programs.
Enables watering based on odd or even days of the month.
Sets watering frequency based on a number of days between cycles.
Adjusts watering duration based on seasonal changes (10-150%).
Provides instructions on how to temporarily disable the controller.
Allows manual activation of stations or programs for testing.
Explains how the controller interacts with rain sensors.
Describes how to temporarily disable the rain sensor.
Allows saving and retrieving preferred program configurations.
Configures the master valve setting for multi-station models.
Sets a period for the controller to remain off.
A diagnostic tool to identify wiring shorts or solenoid issues.
Explains how to interpret the battery status on the display.
Details the procedure to reset the controller to factory defaults.
To Next Page
