To Next PageTo Next Page
Need help?Do you have a question about the Hunter NODE-100 and is the answer not in the manual?
General| Start Times | 4 per program |
|---|---|
| Run Time | 1 minute to 6 hours |
| Waterproof Rating | IP68 |
| Power Source | 24 VAC |
| Programs | 3 |
| Sensor Compatibility | Rain |
| Operating Temperature | -18°C to 66°C |
Overview of the controller's Liquid Crystal Display and its functions.
Explanation of the function of each control button on the device.
Step-by-step instructions for inserting batteries into the controller.
Guide on connecting DC solenoids to the controller wires.
Instructions for physically attaching the controller to a valve.
Describes the controller's display state when inactive.
Describes the display indicators when the controller is operating.
Steps to set the current date and time on the controller.
How to set multiple watering start times for each program.
Instructions for setting the duration of watering for each station.
Method for selecting specific days of the week for watering.
Option to water on odd or even numbered days of the month.
Setting watering based on a number of days between cycles.
Adjusting watering duration based on seasonal changes.
How to temporarily disable all watering functions.
Instructions for manually running stations or programs.
How rain sensors interact with and affect controller operation.
Procedure to temporarily disable the rain sensor functionality.
Saving and recalling preferred program settings.
Configuring a master valve for multi-station NODE models.
Setting a period to suspend all watering for multiple days.
