ENG
ADVANCED PROGRAMMING FEATURES
All advanced programming functions are initiated from the Idle
Mode, which shows the time, day of the week, and battery life
indicator on the display. If something is ashing on the display then
the controller is in one of the programming modes. After a short
period of inactivity the controller will return to Idle Mode.
Sensor Bypass
1. From the Idle Mode, press and hold the
button until the
icon is displayed.
2. The display will show the umbrella icon ashing and On.
3. Press the button to bypass the sensor. The display will show
and Off indicating the weather sensor is bypassed.
The icon will show on the display during normal operation,
indicating the controller is in bypass mode.
4. To reactivate the weather sensor press and hold the button
until the icon is displayed. Press the button to return to
normal sensor mode.
Easy Retrieve Memory
This function allows the user to save a preferred program to
permanent memory in the controller, to be restored at any time.
This is a great way to override changes made, and revert back to
the original programming schedule .
To save a program:
1. Make sure that the controller is programmed with the
preferred programming schedule.
2. From the Idle Mode, press and hold the
and button for
5 seconds to save the current program.
3. The screen will show 3 dashed lines moving from left to
right indicating that the current program is being saved to
permanent memory. The display will ash Done when the
process is complete.
To retrieve a saved program:
1. From the Idle Mode, press and hold the
and button for
5 seconds.
2. The screen will show 3 dashed lines moving from right to
left indicating that the preferred program is being retrieved
from memory.
The controller now has the preferred program as the current
program. The display will ash Done when the process
is complete.
12
To Next Page
Loading...
Need help?
General
