07/02 ColorFlex 13-3
Accessories
The following accessories are provided with the ColorFlex and can be found in the standards box.
• Black glass - placed at the sample port during standardization of 45°/0° instruments.
• Light trap - placed at the sample port during standardization of diffuse/8° instruments.
• White calibrated tile - placed at the sample port during standardization.
• Green tile - used to check instrument performance. Use of the green tile is described on page 24-3.
• Standards care card - gives instructions on how to clean the standards.
• Lens cleaning solution (45°/0° instruments only).
• Lens brush (45°/0° instruments only).
• Certificate of traceability for the standard tile.
• RS-232 computer interface cable.
• AC adapter, 20 W/15V.
• Utility program diskettes and Diagnostics diskette.
Light trap
Green tile
Standards care card
Certificate o
traceability
White calibrated
tile
To Next Page
Loading...
