To Next PageTo Next Page
Need help?Do you have a question about the HunterLab LabScan XE and is the answer not in the manual?
General| Measurement Geometry | 0°/45° |
|---|---|
| Spectral Range | 400-700 nm |
| Software | EasyMatch QC |
| Data Interval | 10 nm |
| Display | LCD |
| Data Output | RS-232, USB |
| Power Requirements | 100-240 V AC |
| Weight | 10 kg |
| Light Source | Pulsed Xenon |
| Photometric Range | 0-100% |
Covers instrument features, indicator lights, and macro button functionality.
Lists and describes common accessories provided with the LabScan XE system.
Details available options and devices for sample positioning and ease of use.
Explains accessories for specific sample types like liquids and fibers, including compression cells and port inserts.
Explains Universal, Coatings, and Textiles software for data analysis and control.
Procedure to test the instrument's measurement repeatability.
Method for verifying long-term instrument performance using a green tile.
Guidelines for cleaning and caring for calibration standards.
Instructions for cleaning the exterior and components of the instrument.
Covers physical dimensions, weight, and operating/storage environmental conditions.
Details power needs, fuse, cord wiring, and ground potential checks.
Describes illumination, viewing, receptor system, and instrument performance metrics.
Notes compliance with relevant industry standards and directives.
Guidelines for selecting, preparing, and presenting samples for accurate measurement.
Covers presenting various sample types, including directional, non-opaque, and fluorescing samples.
Outlines HunterLab's warranty, claims, returns, and service policies.
Procedures for reporting breakage, damage, shortages, or incorrect shipments.
Guidance on contacting HunterLab for troubleshooting and technical advice.
