01/03 Introduction to Your LabScan XE System 2-1
Introduction to Your LabScan XE System
Notice: Use of this equipment in a manner not specified by the manufacturer may
impair the protection afforded by the equipment.
The LabScan XE is a full-scanning spectrocolorimeter with a wavelength range from 400 to 700
nanometers (nm). It is designed for use with the sample port facing up or forward. It can also be used
port-down with an optional stand.
The sample is illuminated by a xenon flash lamp and reflected light is collected by a 15-station fiber
optic ring. For maximum stability, the instrument is automatically standardized to an internal reference
tile whenever measurements are made. The picture below shows the instrument in the port-up
configuration.
LabScan XE Features
The LabScan XE possesses the following default features:
Indicator Lights
The LabScan XE’s indicator light feature lets you know what mode of standardization is currently in
use. There is also an “In progress” light next to the indicator lights that flashes when a reading is in
progress or a motor is in motion.
Indicator
lights
Sample
measurement
port
In progress
light
Port plate
Macro button
Retroviewer
button
Retroviewer
(optional)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
