Need help?Do you have a question about the HunterLab UltraScan PRO and is the answer not in the manual?
General| Spectral Range | 400 - 700 nm |
|---|---|
| Spectral Resolution | 10 nm |
| Display | Color LCD |
| Connectivity | USB, Ethernet |
| Measurement Mode | Reflectance |
| Measurement Geometry | d/8° |
| Data Output | Spectral Data |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Measurement Time | 1 second |
| Light Source | Pulsed Xenon Flash Lamp |
| Inter-Instrument Agreement | DE* ≤ 0.15 CIELAB (typical) on calibrated tiles |
Describes the port at the front of the sensor for sample placement.
Describes the spring-loaded clamp for holding samples securely.
Explains the compartment for measuring transmitted color of solids and liquids.
Describes the port door for controlling specular reflection measurements.
Explains the meaning of the instrument's status indicator lights.
Details the Ganz-Griesser calibration for UV content measurement.
Describes features for adjusting sample viewing area.
Explains the function of the sensor button for sample measurement.
Step-by-step guide for installing the EasyMatch QC software.
Instructions for activating the software license key.
Procedure for installing and configuring the instrument sensor.
Explains the process and modes for instrument standardization.
Guides on setting up multiple measurement modes for the instrument.
Details on configuring UV filter settings and calibration.
Procedure for performing and displaying haze measurements.
How to test the instrument's measurement consistency.
Procedure for verifying long-term instrument performance.
Method to check wavelength accuracy using a didymium filter.
Step-by-step guide for replacing the instrument's main lamp.
Instructions for safely replacing the instrument fuses.
Procedure for replacing the lamp used for the retroviewer feature.
Guidance on cleaning optical components like lenses and filters.
Steps for safely cleaning the instrument's internal sphere.
Details the instrument's dimensions and weight.
Specifies the recommended operating and storage conditions.
Information on voltage, phase, and power consumption.
Defines wire colors for power cords based on voltage.
Procedure for checking ground potential for safe connectivity.
Describes geometry, illumination, and interface details.
Lists key performance metrics like wavelength range and accuracy.
Information regarding conformity to directives and standards.
Lists available accessories for reflectance measurements.
Details accessories and cells for transmittance measurements.
Lists miscellaneous accessories like foot switch assembly.
To Next Page
