HuPro PRO-773 - Instructions for Use: Setup; Device Placement and Tank Filling; Final Assembly Steps

12
INSTRUCTIONS FOR USE
1. Put the device on a flat surface.
2. Remove the top ), take the water tank out of the humidifier. (Pic 1
3. the water tank boom up ), unscrew the lid ) and fill it with water. Screw the lid gently on Put (Pic 2 (Pic 3
the water tank and put it back into the main base boom down. Make sure the
water t
ank is placed correctly
in the humidifier base.
4. Put the top on the humidifier. Make sure the mist outlet nozzle and the top are well on the placed
water tank ). (Pic 4
Pic 1 Pic 2 Pic 3 Pic 4