HuPro PRO-773 - Advanced On-Device Functions; Specialized Modes: ANION, AUTO, TIMER; SLEEP MODE and Water Shortage

15
OPERATING INSTRUCTIONS - ON THE HUMIDIFIER
ANION
Press once to acvate the ionizaon mode. The Anion Funcon symbol will appear on the display. The
device produces 240 million cleansing ions per min to purify the air. Press the same buon again to stop
the anion mode.
AUTO MODE
Press once to acvate the Auto Mode. The Auto Funcon symbol will appear on the display.
In the Auto Mode, the humidifier maintains the relave humidity at 55%~68%. The device will choose the
best humidity level and mist power level automacally according to the current room temperature and
humidity. If the humidity level is ＞68RH, the device will work for 5 minutes, then it will stop working
automacally and enter the Standby Mode. To disable this funcon, press the same buon again.
TIMER
Press the buon to select the auto shut off mer. Choose between 1 to 10 hours. The humidifier will stop
working aer the number of hours you selected. To disable the Timer funcon, press the same buon again
unl the special symbol appears on the display.
SLEEP MODE
Press to acvate the Sleep mode. The Sleep Mode symbol will appear on the display. The display and
backlight will turn off shortly aer that and the humidifier will enter the Sleep Mode. Press any other
buon to turn off the Sleep Mode and switch on the display and backlight.
WATER SHORTAGE
If there is not enough water in the water tank, the device will automacally stop working and enter into
a Standby Mode. A Water Shortage symbol will appear on the display and 3 warning beeps will sound at
once. Refill the water tank and switch the device on. Now it is ready for use.