Hurco VTX Series - Page 9

VTX Series Maintenance and Safety Manual 704-0211-215 Using This Manual — ix
Using the Touchscreen
The console has a touchscreen for entering programming data. To make a selection, tap
the screen on a softkey, field, or drop-down list using the stylus attached to the side of the
console or another suitable pointing device.
Printing
To print part or all of this manual from the CD, select File/Print. Be sure to review the
Print Range selections and make the appropriate choice for pages. Select Properties/
Paper/Quality and adjust the Tray Selection/Paper Source if necessary.
Printing to a Post Script printer provides the best results.
Icons
This manual may contain the following icons:
Caution/Warning
Hints and Tricks
Important
Troubleshooting
Where can we go from here?
Table of Contents
The operator may be injured and the machine severely damaged if the
described procedure is not followed.
Useful suggestions that show creative uses of the WinMax features.
Ensures proper operation of the machine and control.
?
Steps that can be taken to solve potential problems.
Lists several possible options the operator can take.
To assist with onscreen viewing, this icon is located on the cover page. Click
the icon to access the Table of Contents (TOC).
You can also access many of the same TOC entries from the Adobe Reader
bookmarks located on the left side of the PDF page.