Need help?Do you have a question about the Hurco VM30 and is the answer not in the manual?
Explains the spindle and its drive mechanism.
Describes the system that moves the machine axes.
Explains the automatic tool changing system and its specifications.
Safety procedures for electrical service and PCB handling.
Lists specifications for the automatic tool changer.
Steps for installing the machine, including guarding and foundation.
Procedures for initial machine testing and examination.
Essential safety rules for operating machinery.
Best practices for machine operation and maintenance.
Comprehensive daily checks for machine operation.
Daily lubrication checks and maintenance.
Procedures for maintaining the autolube system.
Maintenance tasks for the ATC.
Maintenance for the spindle and its chiller.
Maintenance of the pneumatic system and FRL unit.
Maintenance for flood coolant and washdown systems.
Procedures for machine warm-up and spindle run-in.
Guidance for troubleshooting various machine problems.
Information on how to order replacement parts.
General| Type | Vertical Machining Center |
|---|---|
| Table Size | 1295 x 508 mm |
| X-Axis Travel | 1270 mm |
| Y-Axis Travel | 508 mm |
| Z-Axis Travel | 20" (508 mm) |
| Spindle Speed | 10, 000 rpm |
| Tool Capacity | 21 tools (optional 30 tools) |
| Control Type | Hurco CNC Control |
| Rapid Traverse (X, Y, Z) | 945 ipm (24, 000 mm/min) |
To Next Page
