HUROM HH series - Slow Juicer Assembly

Align the chamber arrow [ ] with hopper arrow
[ OPEN] and turn the hopper clockwise until it
clicks so that the hopper arrow [ CLOSE] aligned
with chamber arrow[ ].
OPEN
SLOW JUICER ASSEMBLY
Place the chamber on the base.
Make sure to press the auger down into the strainer in
STEP 2. The hopper does not close properly when the
auger does not fit in completely.
4
3
2
1
Assemble the parts in the following order:
Chamber>Spinning Brush> Strainer. Make sure
chamber arrow [ ] aligns with strainer arrow [ ].
08 l
The spinning brush can be assembled regardless
of the direction.
STEP
STEP
STEP
STEP
2 4PJ12235-HH series_V.01.indd 10 2013-06-07 오후 7:40:57