DO NOT OPERATE WITHOUT LOCKING THE HOPPER PROPERLY.
It may cause an injury or a failure.
CAUTION Hazards or unsafe practices which could result in minor personal injury or
appliance damage.
IF AUGER ROTATION IS STOPPED IN NORMAL OPERATION, PRESS [RE-
VERSE/REV] BUTTON AND HOLD FOR 2~3 SECONDS AND THEN AFTER
REVERSE OPERATION IS COMPLETELY STOPPED, PRESS [ON] BUTTON
AGAIN. If such a stop event continues during the operation, the parts may be damaged and perfor-
mance may be deteriorated due to overheating in a motor. When the problem continues, immediately
stop the appliance and contact the local Customer Care Center.
DO NOT OPERATE THE APPLIANCE FOR MORE THAN 30 MINUTES AT A
TIME.
It may cause a motor failure due to overheating.
Cool it down sufficiently about 5 minutes and operate it again.
WHEN PLACING INGREDIENTS INTO THE HOPPER CHUTE, ONLY USE THE
PUSHER PROVIDED.
It may cause injury or failure.
ALWAYS UNPLUG THE APPLIANCE AFTER USE. ALWAYS DISCONNECT
THE APPLIANCE FROM THE SUPPLY IF IT IS LEFT UNATTENDED AND BE-
FORE ASSEMBLING, DISASSEMBLING OR CLEANING. WHEN UNPLUG-
GING THE POWER CORD, MAKE SURE TO HOLD THE POWER CORD.
Pulling on the wire to unplug may cause electric shock or fire.
WHEN USING THE APPLIANCE, BE CAREFUL FOR A NECKTIE, LONG
NECKLACE, SCARF, ETC. NOT TO BE ENTANGLED INTO HOPPER CHUTE.
It may cause injury, failure or breakage.
2 4PJ12235-HH series_V.01.indd 8 2013-06-07 오후 7:40:53
To Next Page
Loading...
Need help?
General
