08
8. Separating and Washing
Unplug the power cord with dry
hands after the unit has been
completely stopped.
Remove the chamber set from the
main body. Twist the chamber cover
to open and lift up the parts in
order to disassemble the unit.
Use a cleaning brush and wash the
chamber set under running water.
Wipe the main body with a damp
towel or a soft cloth.
The silicone packing can be
disassembled and washed.
(Including juice cap packing,
chamber packing, silicone brush)
Soak in water diluted with one or
two drops of baking soda or natural
bleach for dishes for about 30
minutes to sterilize and clean.
NOTICE
If the unit is not cleaned immediately
after use, a residue may dry and stick to
the unit. This will make disassembling
and cleaning difficult as well as lead to
performance degradation.
Do not wash with hot or boiling water,
an iron scrubber, abra sive material,
sink solvents, or sharp cleaning tools.
Do not put it in a dishwasher or dish
dryer. After washing, thoroughly and
naturally dry, and store in a clean area.
01
02
03
04
05
06
01
02
4DC010791 사용설명서(통합) HP 브러쉬(영어, 불어, 독어, 이태리어, 스페인어)_V.01.indd 8 2019-10-15 오후 5:26:24
To Next Page
Loading...
Need help?
General
