- 07 -
How to use
•Modes in which Preset can be used: Low-Starch, white rice, mixed grain, porridge
•In Preset mode, turn the function dial clockwise or counterclockwise to increase or decrease the
time by 10 minutes.
•The set time will be the estimated time, with 1 hour and 30 minutes as the minimum reservation
time and 24 hours as the longest reservation time. We recommend not exceeding the reservation
time of 12 hours.
❸
Low starch rice
①
Place the inner pot on a flat surface and pour a cleanly washed amount of rice and water
into the inner pot.
The water should not exceed the maximum water level (marked on the inner pot).
②
Put the tray into the inner pot and close the lid.
③
Select the [Low starch] menu using the jog dial above the panel.
④
Press the jog dial to switch to Cook mode.
⑤
When cooking is finished, open the lid to take out the tray and discard the water. (Beware of
burns.)
** At this time, to cook low starch rice, pour water based on the lines on the left side whereas,
for normal white rice, pour water based on the lines on the right.
Ex) For instance, if 1 cupful of rice is added by using the enclosed measuring cup to cook low
starch rice, pour water up to the 1.0 line in the water level on the left.
❹
White Rice/Mixed Grain
①
Put the washed rice and a corresponding amount of water into the inner pot.
The water should not exceed the maximum water level.
②
Close the lid and turn the jog dial on the control panel to select [White Rice or Mixed Grain]
mode.
③
Press the Cook button (jog dial) to switch to Cook mode.
* Mixed grain should be sufficiently soaked in water.
❺
Porridge
①
Wash the prepared ingredients (white rice, ingredients) thoroughly and put them into the
inner pot.
②
Put the right amount of water up to the water grid of the inner pot (not exceeding the
maximum).
③
Close the lid and turn the jog dial on the control panel to select [Porridge] mode.
④
Press the Cook button (jog dial) to switch to Cook mode.
To Next Page
Loading...
Need help?
General