OPEN
CLOSE
Black arrow
on the hopper
Red dot on
the Bowl
Strainer
Spinning
Brush
Red dot
on the
strainer
Red dot on
the Bowl
Bowl
Strainer
Squeezing
Screw
Assembly instruction – Type 2
98
1
4
5
2 3
Place the strainer
into the spinning
brush
Place the strainer
+ spinning brush
into the bowl.
① Make sure the red
dot on the strainer
and the red dot on
the bowl are aligned.
Assemble the entire Top
Set onto the base.
① As shown left, assemble the
bowl onto the base and twist
the bowl so that hopper edge is
pointing to “close ”
Assemble the hopper
onto the bowl.
① Make sure the arrow on the
hopper and the red dot on
the bowl are aligned.
② Make sure the arrow on the
hopper is pointing to “close
”on the base.
Push the squeezing
screw into the
strainer.
Juice
ejection