Hurricane HBD-41 - OPERATING PROCEDURES; Starter Handle and Height Adjustment

10
Figure 13 HBD-41 (DYM1651PF) Figure 14 HBD-41 (DYM1651PF) Figure 15 HBD-41 (DYM1651PF)
Figure 16 HBD-46R (DYM1666) Figure 17 HBD-46R (DYM1666) Figure 18 HBD-46R (DYM1666)
5.3 STARTER HANDLE
Gently pull out the starter handle from the engine to the rope guide (fig. 19, 20).
Figure 19 Figure 20
5.4 HEIGHT OF CUT
Apply outward pressure to disengage the lever from the right rear wheel rack. Move the lever forward or
backwards to adjust the cutting height. The setting applies to all 4 wheels with one lever (fig. 21 & 22).
Figure 21: HBD-41 (DYM1651PF) Figure 22: HBD-46R (DYM1666)
rope guide
starter handle
Do not start the
engine before you
fill oil in!
high
low
low
high