Hurricane Supreme Series - User Manual

16" Oscillating
Floor Fan
Instructions
Supreme Series
D
E
L
A
S
E
R
I
E
S
U
P
R
E
M
O
OPERATING INSTRUCTIONS
• Speed control settings are off, low, medium and high.
• TILTING: Always switch off
fan before making any
adjustments. Holding rear
motor cover, tilt fan head
either up or down.
• OSCILLATION: Press knob
down to make fan oscillate
or pull knob up to stop.
• HEIGHT ADJUSTMENT: Loosen adjustment knob,
adjust height and tighten adjustment knob.
MAINTENANCE
• BE SURE THE PLUG IS REMOVED FROM OUTLET before
attempting any cleaning or maintenance.
• Use only a soft, moist cloth with a soap solution.
• DO NOT immerse the fan in water, and never allow water to
drip into the motor housing.
• DO NOT use a gasoline thinner or other chemicals to clean fan.
PRESERVATION
• Apply a few drops of lubricant on motor shaft to prevent
from corrosion.
• The front and rear guards can be cleaned with a soft brush
or soft damp cloth.
• The motor housing and pedestal can be wiped clean with
a soft damp cloth.
• For storage, clean fan carefully as instructed and store in it’s
original box. Store fan in a clean, dry place.
www.hurricane-fans.com
™
www.hurricane-fans.com
™
Use a “QR Code App” on
your smart phone to access
our website and browse our
entire product offering or go
to: www.hurricane-fans.com

Summary

Operating Instructions and Maintenance

Operating Instructions

Covers speed settings, tilting, oscillation, and height adjustment for the fan.

Maintenance and Preservation

Details on cleaning, lubrication, and proper storage to maintain the fan.

Safety Precautions and Fan Setup

General Safety Precautions

Essential safety guidelines for using the fan, including electrical and operational safety.

Fan Setup Instructions

Step-by-step guide for assembling the fan components, including guards and blade.

Hurricane Supreme Series Specifications

General

Model	Supreme Series
Type	Ceiling Fan
Diameter	52 inches
Blade Span	52 inches
Speeds	3
Material	Metal