To Next PageTo Next Page
Need help?Do you have a question about the HUSABERG FC 550/4 and is the answer not in the manual?
Conditions for using Husaberg parts and tools for maintenance.
Information regarding copyright and modification rights of the manual.
Guidelines for personal safety, motorcycle condition, transportation, and responsible riding.
Essential checks before riding to ensure safety and proper function.
Detailed list of checks to perform before riding the motorcycle.
Technical specifications and data for various motorcycle models.
Standard jetting configurations for the carburettor across different models.
Specified torque values for fasteners and components during maintenance.
Maintenance intervals for chassis components on different model series.
Regular and scheduled maintenance for engine components on FC, FSc, FX models.
Regular and scheduled maintenance for engine components on FE, FSe models.
Location of VIN, engine numbers, steering lock, and ignition lock.
Description of combination switches, levers, and buttons on the handlebar.
Information on speedometer, indicator lamps, throttle adjustment, and brake fluid checks.
Procedure for starting the motorcycle using the kick starter.
Procedure for starting the motorcycle using the electric starter.
Details on engine oil, filter, and lubrication system maintenance.
Information on the CDI ignition system, spark plug, and timing.
Instructions for cleaning and maintaining the air filter.
Procedure for checking and adjusting valve clearances for engine performance.
How to operate and adjust the carburettor for optimal performance.
Information on the fuel tank and recommended fuel grade for the motorcycle.
Checks and maintenance for the radiator and coolant system.
Procedures for checking clutch fluid, air bleeding, and adjustment.
Information on the decompression system and cable adjustment.
Procedures for removing, assembling, and checking the front wheel and brake.
Procedures for removing, assembling, and checking the rear wheel and chain.
Steps for removing and replacing wheel bearings.
Instructions for lubricating, tensioning, and maintaining the drive chain.
Details on Enduro front brake fluid, pads, bleeding, and lever adjustment.
Details on Supermotard front brake fluid, pads, bleeding, and lever adjustment.
Details on rear brake fluid, pads, bleeding, and lever adjustment.
Adjusting rebound, compression damping, and oil for the front fork.
Adjusting compression, rebound damping, and spring preload for rear shock absorber.
Adjusting compression, rebound damping, and spring preload for Supermotard rear shock.
Checking and servicing steering head bearings and swingarm components.
Electrical wiring diagrams for FE/FS models with electric starters.
Electrical wiring diagrams for FC/FX models, including kick-starter variants.
General