HUSKY LINERS 47111 User Manual

4711 H2 Spare Tire Ca#116FA.doc
H2 Hummer Spare Tire Carrier Mounting Instructions
Tools Required for Installation: Package Contents:
Socket Wrench Swing arm Assembly
19 MM socket Hinge Plate
15 MM socket Striker Plate
7/16” Wrench License Plate Bracket
Torque Wrench Fastener Hardware Bag (Includes):
Drill M12 X 70 MM Flange head bolts X 4
7/16” Drill Bit 10-32 X 3/8” Button head bolts X 2
Center Punch Wire Tie X 3
Hammer Thick Grommet
Phillips Head Screwdriver Thin Grommet
1/8” Allen Wrench 3/8”-24 X _” Hex Bolt & 2” Fender Washer
License Plate Fastener Bag
Jack Support Bracket (Back Page)
Jack Bracket Vibration Dampener
Interior Panel Plug
End Caps (2”X 4”) X 2
Before beginning installation, check to make sure all components listed above are included in packaging.

HUSKY LINERS 47111 Specifications

General

Brand	HUSKY LINERS
Model	47111
Category	Automobile Accessories
Language	English

Summary

Spare Tire Carrier Installation Steps

License Plate Light Wiring

Wiring Harness Preparation

Prepare the wiring harness plug by removing components and inserting tag light wires.

Wiring Connections and Final Installation

Connect wiring, secure harness, install license plate, and test functionality.

Jack Support Bracket Installation

Mounting the Jack Support Bracket

Install Jack Support Bracket using factory bolts and spacer for correct alignment.

Securing Tire Chocks and Panel Plug

Attach tire chocks to the bracket and install the panel plug to fill an opening.