EasyManua.ls Logo

Husky 33158 - Cross Member Height Adjustment; Trailer Coupling Procedure

Husky 33158
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
All Products limited to Vehicle Tow Rating, see Vehicle Owner’s Manual. Visit www.huskytow.com for Warranty Information / Tech Support /
Product Updates. 2020 Keystone Automotive Operations Inc. All Rights Reserved. 08/07/2020-Rev3 Page-10
2. If necessary, adjust the cross member to the proper height, ensuring the fasteners are re-
torqued to 75 ft. lbs.
Coupling Your Trailer
1. Ensure the 5th Wheel Trailer wheels are blocked front & rear & that the rear stabilizer
jacks are fully retracted.
2. Also make sure the 5
th
Wheel Trailer landing leg feet are on a stable surface.
3. Pull handle fully out, then while pulling it to the rear of the truck let it slide back in until it
catches on the latch.
4. Check that the Orange indicator is not obscured by Lock Hasp. This shows the Hitch
is unlocked.
5. With hitch head level, set trailer king pin box ½” to 1” below hitch so trailer will ride up
and onto hitch. Back Up the truck under the trailer so the king pin enters the hitch.

Related product manuals