All Products limited to Vehicle Tow Rating, see Vehicle Owner’s Manual. Visit www.huskytow.com for Warranty Information / Tech Support /
Product Updates. 2020 Keystone Automotive Operations Inc. All Rights Reserved. 08/07/2020-Rev3 Page-13
5. Pull handle fully out, then while pulling it to the rear of the truck let it slide back in
until it catches on the latch.
6. Check that the lock hasp indicator shows jaw open.
7. Slowly drive the truck out from underneath of the trailer.
8. Observe the lock hasp to ensure the hitch does not accidentally close during
uncoupling.
WARNING
DURING COUPLING AND UNCOUPLING OF THE TRAILER SUDDEN AND
UNEXPECTED MOVEMENTS OF THE TRUCK AND/OR TRAILER MAY OCCUR.
ALWAYS KEEP WELL CLEAR OF THE TRUCK AND TRAILER DURING
COUPLING AND UNCOUPLING.
OPERATIONS SUCH AS CONNECTING AND DISCONNECTING POWER CABLES,
OPENING AND CLOSING THE HITCH, INSTALLING SAFETY CLIPS OR
PADLOCKS SHOULD ONLY BE UNDERTAKEN WHEN THE WEIGHT OF THE
TRAILER IS BEING CARRIED ON THE TRAILER LANDING GEAR, THE WHEELS
OF THE TRAILER ARE CHOCKED AND THE TRUCK IS IN PARK WITH THE
EMERGENCY BRAKE APPLIED.
To Next Page
Loading...