Husky 8200445 - User Manual

Item # 0000000000
Model # 8200445
THANK YOU
We appreciate the trust and confidence you have placed in Husky through the purchase of this vacuum. We strive to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Husky!
USE AND CARE GUIDE
4 GALLON PORTABLE POLY WET/DRY VACUUM
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday,
9 a.m. – 6 p.m., EST, Saturday
1-888-HD-HUSKY
HUSKYTOOLS.COM

Summary

Safety Information

Important Safety Instructions

Essential safety precautions and warnings for operating the appliance. Always read before use.

Servicing of a Double-Insulated Wet;Dry Vacuum

Guidelines for servicing the double-insulated vacuum, emphasizing qualified personnel and correct parts.

Warranty

Details the Husky 2-year limited warranty, including coverage, exclusions, and return policy.

Pre-Assembly

Package Contents

Lists all items included in the package with their respective part numbers and quantities.

Tools Required

Specifies the tools needed for assembly, such as a Phillips screwdriver.

Hardware Included

Details the hardware included for assembly, noting it is not shown to actual size.

Assembly

Installing Handle

Step-by-step instructions for attaching the handle to the vacuum unit.

Installing Casters

Instructions for attaching the accessory holders and casters to the vacuum base.

Operation

Dry Pick-up

Instructions for using the vacuum for dry debris collection, including filter installation.

Wet Pick-up

Instructions for wet debris collection, including filter replacement and float mechanism.

Blower

Steps on how to use the vacuum's blowing feature with the hose and blower port.

Care and Maintenance

Filter Replacement

Detailed instructions and warnings regarding filter replacement and cleaning for optimal performance.

Cleaning

Procedures for cleaning the exterior and interior of the wet/dry vacuum.

Storage

Guidelines for proper storage of the vacuum after use, including cleaning and cord management.

Troubleshooting

Vacuum Not Running

Addresses issues where the vacuum does not power on, suggesting electrical checks.

Loss of Suction

Diagnoses causes for reduced suction during wet or dry pick-up and outlines corrective actions.

Service Parts

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document is a Use and Care Guide for a Husky 4 Gallon Portable Poly Wet/Dry Vacuum, Model #8200445.

Function Description:

The Husky 4 Gallon Portable Poly Wet/Dry Vacuum is designed for household use, capable of both wet and dry pick-up, as well as a blowing function. It is a versatile cleaning appliance that can handle various types of debris and liquids. The vacuum is equipped with a motor that generates suction for cleaning and can also be configured to blow air for clearing areas.

Important Technical Specifications:

• Capacity: 4 Gallons (15.1 Liters)
• Type: Portable Poly Wet/Dry Vacuum
• Insulation: Double-insulated, meaning it has two systems of insulation instead of grounding. Servicing requires specialized knowledge and identical replacement parts.
• Power: Operates on mains voltage, with frequency and voltage shown on the rating plate.
• Filter System: Uses a cartridge filter for both wet and dry pick-up, and a foam filter specifically for wet pick-up. A filter retainer is used to secure the cartridge filter.
• Safety Features:
  • Float mechanism for wet pick-up: automatically cuts off airflow when the liquid in the tank reaches a predetermined level to prevent motor damage.
  • Polarized plug: one blade is wider than the other, designed to fit in a polarized outlet only one way to reduce the risk of electrical shock.
  • Safety warnings regarding flammable materials, explosive dusts, toxic materials, and eye protection (safety goggles recommended).
  • Caution regarding hearing damage (ear protectors recommended for extended use or noisy areas).
• Included Components: Handle, On/Off switch, Latches (2), Vacuum port inlet, Dust tank, Blowing port, Power cord hook, Accessory holders (4), Casters (4), Hose, Floor nozzle, Extension wands (3), Cartridge filter (multi-fit replacement), Foam filter.
• Hardware Included: Screw ST 3.9X16F (4).
• Tools Required for Assembly: Phillips Screw Driver.

Usage Features:

• Dry Pick-up:
  • Requires the cartridge filter (M) to be installed.
  • Installation involves sliding the cartridge filter over the lid cage and pushing seals against the power head, then securing with the filter retainer by turning clockwise.
  • To remove for cleaning, turn the filter retainer counter-clockwise.
  • The cartridge filter can be cleaned by shaking, brushing, or rinsing with water (from the inside) and must be completely dried (approx. 24 hours) before re-installation.
  • It is crucial not to pick up soot, cement, plaster, or drywall dust without a filter and dust bag in place, as these fine particles can affect motor performance or be exhausted back into the air.
  • Do not use without a dust bag and/or filters in place.
• Wet Pick-up:
  • Requires the cartridge filter (M) to be removed and replaced with the foam filter (N).
  • The integrated float mechanism will stop suction when the tank is full. When this occurs, the vacuum should be turned off, unplugged, and the tank emptied.
  • Wet pick-up accessories should be washed periodically.
  • Do not run the motor with the float in a raised position to prevent damage.
• Blowing Function:
  • To use, insert one end of the hose (J) into the blower port (F) on the vacuum.
  • Turn the vacuum "ON" (position "I").
• General Operation:
  • The On/Off switch has "0" for OFF and "I" for ON.
  • Always unplug the appliance when not in use, before servicing, or before removing the tank cover.
  • Do not leave the appliance plugged in or operating unattended.
  • Avoid using the vacuum as a toy, especially near children.
  • Do not use with a damaged cord or plug.
  • Do not pull or carry by the cord, or run the appliance over the cord.
  • Always grasp the plug, not the cord, to unplug.
  • Do not handle the plug or appliance with wet hands.
  • Keep openings free of dust, lint, hair, and anything that may reduce airflow.
  • Keep hair, loose clothing, fingers, and all body parts away from openings and moving parts.
  • Do not pick up burning or smoking materials.
  • Use extra care when cleaning on stairs.
  • Do not pick up flammable or combustible liquids or use in areas where they may be present.
  • Do not use as a sprayer for flammable liquids.
  • Do not vacuum toxic, carcinogenic, combustible, or other hazardous materials such as asbestos, arsenic, barium, beryllium, lead, pesticides, or other health-endangering materials.
  • Empty heavily loaded tanks with special care and empty the tank after each use to avoid spontaneous combustion.
  • Wear safety goggles when operating the vacuum to prevent eye damage from foreign objects.
  • Stay alert and use common sense; do not operate when tired, distracted, or under the influence of substances.
  • Unplug before connecting hose, nozzles, filters, or other accessories.

Maintenance Features:

• Filter Cleaning/Replacement:
  • The cartridge filter should be cleaned often to maintain peak vacuum performance.
  • After cleaning, inspect the filter for tears or small holes; replace immediately if damaged, as even a small hole can allow dust to escape.
  • Before installing a filter, clean the lid area to ensure the clamp ring seals the bag and prevents small particles from bypassing the filter.
  • The cartridge filter (M) can be rinsed with water (from the inside) and must be completely dried (approx. 24 hours) before re-installation.
  • If the filter has been used for wet pick-up, it must be cleaned and dried before using for dry pick-up.
  • Replacement cartridge filter SKU#332340 is recommended.
  • Always reinstall the reusable dry filter for dry pickups and the foam filter for wet pickups to avoid damage to the blower wheel and motor.
  • Clean the filter in an open area.
• General Cleaning:
  • Clean the outside of the vacuum with a cloth dampened with warm water and mild soap.
  • To clean the tank: dump debris, wash thoroughly with warm water and mild soap, and wipe dry.
• Storage:
  • Before storing, the dust tank should be emptied and cleaned.
  • The power cord should be wrapped and hung on the unit.
  • Accessories should be kept in the accessory holder for easy access.
  • Store the vacuum indoors.
• Troubleshooting:
  • A troubleshooting section is provided for common issues like the vacuum not running or loss of suction, with possible causes and corrective actions.
  • Always turn the power switch off and disconnect the power plug before performing troubleshooting checks.
• Servicing:
  • For double-insulated wet/dry vacuums, servicing should only be done by qualified service personnel using identical replacement parts.
  • Unplug the power cord before servicing electrical parts.
• Warranty:
  • Husky 2 Year Limited Warranty: Covers defects in materials or workmanship. Return to The Home Depot with a receipt for replacement. Excludes incidental/inconsequential damages, misuse, abuse, or normal wear and tear.
• Customer Service:
  • Contact Husky Customer Service at 1-888-HD-HUSKY (1-888-43-HUSKY) for questions, problems, or missing parts.
  • Hours: 8 a.m. – 7 p.m. EST, Monday-Friday; 9 a.m. – 6 p.m. EST, Saturday.
  • Website: HUSKYTOOLS.COM.

Husky 8200445 Specifications