To Next PageTo Next PageWhy is there a loss of suction during dry pickup in my Husky Vacuum Cleaner?
If you experience a loss of suction during dry pickup with your Husky Vacuum Cleaner, the tank might be full. In this case, drain and clean the tank. Alternatively, the hose could be clogged; remove the hose and clean out any debris. A clogged filter could also be the culprit, so try cleaning or replacing the filter.
What to do if there is a loss of suction during wet pickup with my Husky Vacuum Cleaner?
If you notice a loss of suction during wet pickup with your Husky Vacuum Cleaner, it could be due to several reasons. First, check if the tank is full and drain/clean it if necessary. Also, the hose might be clogged, so remove it and clear out any debris. Finally, the filter might be clogged, requiring cleaning or replacement.
General| Brand | Husky |
|---|---|
| Model | AT18503-10C |
| Category | Vacuum Cleaner |
| Language | English |
Basic precautions for using an electrical appliance, read all instructions before use.
Details on servicing double-insulated wet/dry vacuums, requiring qualified personnel and identical parts.
Precautions to reduce the risk of electrical shock, including plug usage and servicing.
Details of Husky's limited lifetime warranty, exclusions, and customer service contact information.
Lists and illustrates all parts included in the package for assembly.
Warning against operating the vacuum in areas with flammable materials or dust to prevent fire or explosion.
Warning to always wear safety eyewear when operating the vacuum to prevent eye damage from blown objects.
Caution to wear ear protectors when using the vacuum for extended hours or in noisy areas.
Instructions for installing the casters into the accessory holders, ensuring they are locked securely.
Instructions for installing and using the cartridge filter for dry vacuuming operations.
Instructions for replacing the cartridge filter with a foam filter for wet pickup operations.
Steps to use the vacuum's blower function by connecting the hose to the blower port.
Instructions and warnings for replacing the multi-fit cartridge filter for optimal vacuum performance.
Guidelines for storing the vacuum, including emptying the tank and keeping accessories organized.
Steps for cleaning the vacuum exterior and tank using warm water and mild soap.
Troubleshooting steps for when the vacuum does not run, checking for electricity supply.
Troubleshooting steps for loss of suction during wet pickup, checking tank, hose, and filter.
Troubleshooting steps for loss of suction during dry pickup, checking tank, hose, and filter.
