867006-1004 Hubspace Husky Smart Watering Timer - FAQ
How do I pair my timer into Hubspace?
The timer has a QR code included on the back left side of the timer that can be easily scanned. Download the
Hubspace app, then scan the QR code from within the Hubspace app to make the connection. Once scanned, a
message will pop up telling you that your timer is being added to your Hubspace app.
Do I need to pair my gateway?
Yes, your gateway also needs to be paired within the Hubspace app, it also comes with a QR code that is easily
scanned. Open your Hubspace app and scan the QR code that is on the Quick start guide. Once scanned, a message
will pop up telling you that your gateway is being added to your Hubspace app. The app will also give you a message
that a Wi-Fi gateway needs to be paired to use with Wi-Fi functionality.
What Mobile Devices are supported?
Android and Apple devices are supported for this timer.
Can I use Alexa and Google voice activation?
Yes, both Alexa and Google voice activations are available on the timer for simplicity and ease of use.
Can I program or change a schedule from anywhere?
Yes, you can program from your smartphone within the app to change a schedule, start watering, stop watering, or
activate rain delay on the go.
How long can I set rain delay for?
Both spigots can have rain delay set for between 1 and 15 days.
Will my schedule resume after rain delay is over?
Yes, your preset schedule will resume at its next programmed time after your rain delay feature has finished.
How many schedules can I program? Is it unlimited?
The timer will allow you to program up to 35 watering schedules per spigot for complete watering customization. It is
not unlimited but does allow many programs to be scheduled.
Will my schedules return if I remove the batteries?
Yes, all schedules as well as the date/time should reconnect once the timer reconnects to the cloud via the Hubspace
app.
To Next Page
Need help?
General
