6
Assembly (continued)
Maintenance
Lubricate the slides semi-annually with a spray lubricant or light duty oil.
Care and Cleaning
□
Clean the cabinet surfaces and drawers periodically with a soft rag and water.
□
Grease and oil can be removed with most standard cleaning fluids. For safety, use a nonflammable cleaning fluid.
Check all the screws and nuts periodically for tightness. Tighten them when necessary.
□
□
Insert four shelf brackets (CC) into the slots on the side panels at the desired height. Make sure the four brackets (CC) are at
the same height. Place the shelf (B) over the shelf brackets (CC), and push it down onto the shelf brackets. Make sure the
shelf (B) is properly and safely locked by the upright hooks of the shelf brackets.
Slots on the inner front
side of side panel
B
CC
Shelf locked by shelf bracket
after installation
CC
Slots on the inner back side
of side panel
INSTALL THE SHELF
To Next Page
Loading...
